Search Result

DSP1A/SSI/120AC - Distribution Surge Protector - 90-150V AC rms 40-60Hz/DC

120V All-Mode Surge Arrester for Solid State Interlocking (SSI) Protection with MOV or SAD and combination component technologies.

Suitable for AC & DC systems, protection for signals, points, level crossings etc. Network Rail PADS Approved (PADS No.0086-000060)

EU "Schuko" CEE 7/3 Sockets Strips - #0 Unprotected Series

  • Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead.
  • 2, 4, 6, 8 or 10 way. CEE 7/4 (Type F) Plug or CEE 7/4 (Type F) RCD Plug

NOTE: These units are NOT Surge Protected

  •  Example shown is a 603DA - 6 Way, ABS no Switch, EU hardwired Plug

IEC C13 Sockets - #0 Unprotected Series

  • Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead.
  • 2, 4, 6, 8 or 10 way.
  • NOTE: These units are NOT Surge Protected

  •  
  • Example 1 shown is a 402IEC/GBL - 4 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 2 shown is a 802IEC/GBL - 8 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 3 shown is a 602IEC/GBL - 6 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD

BS1363 Type G (UK) - #0 Unprotected Series

  • Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead.
  • 2, 4, 6, 8 or 10 way.

    NOTE: These units are NOT Surge Protected

Example shown is a 603GBA - 6 Way, ABS no Switch, UK hardwired Plug

Combo BS1363 (UK) & IEC C13 Sockets - #0 Unprotected Series

  • Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead.
  • 2, 4, 6, 8 or 10 way.

    NOTE: These units are NOT Surge Protected

  • Example shown is a 202GBL/4IEC - 2 Way + 4 IEC, Aluminium With Switch, Wired Lead with RCD

EU "Schuko" CEE 7/3 Sockets Strips -  #2 Surge Protected Series

NOTE: Surge Protected - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way. CEE 7/4 (Type F) Plug or CEE 7/4 (Type F) RCD Plug

Example shown is a 623DA - 6 Way, ABS no Switch, EU hardwired Plug

IEC C13 Sockets Surge Protected Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

 

  • Example 1 shown is a 422IEC/GBL - 4 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 2 shown is a 822IEC/GBL - 8 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 3 shown is a 622IEC/GBL - 6 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD

BS1363 Surge Protected Series  - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

Example shown is a 623GBA - 6 Way, ABS no Switch, UK hardwired Plug

Combo BS1363 & IEC - Surge Protection Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

 

Example shown is a 222GBL/4IEC - 2 Way + 4 IEC, Aluminium With Switch, Hardwired Lead with RCD Plug

EU "Schuko" CEE 7/3 Sockets Strips - #3 Surge & RFI Protected Series

NOTE: Surge & RFI Protected - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way. CEE 7/4 (Type F) Plug or CEE 7/4 (Type F) RCD Plug

Example shown is a 633DA - 6 Way, ABS no Switch, EU hardwired Plug

IEC C13 Sockets Surge & RFI Protected Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

 

  • Example 1 shown is a 432IEC/GBL - 4 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 2 shown is a 832IEC/GBL - 8 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 3 shown is a 632IEC/GBL - 6 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD

BS1363 Surge & RFI Protected Series  - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

Example shown is a 633GBA - 6 Way, ABS no Switch, UK hardwired Plug

Combo BS1363 & IEC - Surge Protection Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

 

Example shown is a 232GBL/4IEC - 2 Way + 4 IEC, Aluminium With Switch, Hardwired Lead with RCD Plug

EU "Schuko" CEE 7/3 Sockets Strips - #4 Surge & Noise Protected Series

NOTE: Surge & Noise Protected - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way. CEE 7/4 (Type F) Plug or CEE 7/4 (Type F) RCD Plug

Example shown is a 643DA - 6 Way, ABS no Switch, EU hardwired Plug

IEC C13 Sockets Surge & Noise Protected Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

 

  • Example 1 shown is a 442IEC/GBL - 4 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 2 shown is a 842IEC/GBL - 8 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD
  • Example 3 shown is a 642IEC/GBL - 6 IEC Way, Aluminium With Switch, Plug-in IEC Lead with RCD

BS1363 Surge & Noise Protected Series  - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

Example shown is a 643GBA - 6 Way, ABS no Switch, UK hardwired Plug

Combo BS1363 & IEC - Surge & Noise Protection Series - Type 3 / Class III

Choose from - Aluminium or ABS case. RCD, IEC or Standard 2m trailing lead. 2, 4, 6, 8 or 10 way.

  • Example shown is a 242GBL/4IEC2 Way + 4 IEC, Aluminium With Switch, Hardwired Lead with RCD Plug

Type 2 - Class II / Type 3 -  Class III - 6kA SAD, 40kA MOV - Single & Three Phase - 1 to 4 Pole - Remote & Non Remote

A series of modular surge protection devices for the over-voltage protection of equipment connected to the incoming low voltage AC power supply.

Type 1 - Class I / Type 2 - Class II - Single Phase - 1 Pole - 12.5kA - 75VAC

The T1PD1/12.5/75R is a lightning surge arrester type 1 or type 2 according to EN 61643-11.

The main use of T1PD1/12.5/75R arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures and elimination of switching surges that originate in power supply systems.

Type 1 - Class I / Type 2 - Class II - Single Phase - 25kA - 48VDC

The T1PD1/25/48DCR is a type 1 - class I or type 2 - class II 48V DC surge protector designed to protect equipment connected to DC power supplies from lightning surges.

Type 1 - Class I / Type 2 - Class II - Single Phase - 1 Pole - 7kA - 75VAC

These SPDs are designed for use in the LPZ Concept at the boundaries of LPZ 0 – 1. For use in residential houses with cable supply and subdistribution boards of big industrial structures. These arresters are mainly intended for use in TNC systems.

Type 1 - Class I - Single Phase - 1 Pole - 12.5kA - 320VAC 

For use in the LPZ Concept at the boundaries of LPZ 0 – 1

Designed mainly for use on the power supply lines, which operate a TN-C, TN-S and TT earthing system.

Type 1 - Class I / Type 2 - Class II - Single Phase - 1 Pole - 12.5kA - 500VAC

These devices are single-pole lightning and surge arresters Type 1+2 according to IEC EN 61643-11.

Type 1 - Class I - Single Phase - 50kA - 255VAC

For use in the LPZ Concept at the boundaries of LPZ 0 – 1

Designed mainly for use in systems that use TN-C earthing. For TNS and TT systems it is necessary to combine these arresters with an additional module designed for Neutral – Earth use.

Type 1 - Class I - Single Phase - 50kA - 440VAC

For use in the LPZ Concept at the boundaries of LPZ 0 – 1

Designed mainly for use in systems that use TN-C earthing. For TNS and TT systems it is necessary to combine these arresters with an additional module designed for Neutral – Earth use.

Type 2 - Class II - Single Phase - 1 Pole - 20kA - 270VAC

The T2PD1/20/275 & T2PD1/20/275R (remote version) are non moduler single-pole, metal oxide varistor surge arresters, Type 2 - Class II according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2.

Type 2 - Class II - Single Phase - 1 Pole - 20kA - 120VDC

The T2PDM1/20/120DC & T2PDM1/20/120DCR are single-pole, metal oxide varistor surge arresters, Type 2 according to IEC EN 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2.

Type 2 - Class II - Single Phase - 1 Pole - 20kA - 24VDC

The T2PDM1/20/24DC and T2PDM1/20/24DCR are single-pole, metal oxide varistor surge arresters, Type 2 according to IEC EN 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2.

Type 2 - Class II - Single Phase - 1 Pole - 20kA 275VAC

The T2PDM1/20/275 & T2PDM1/20/275R are single-pole, metal oxide varistor surge arrester, Type 2 according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2.

Type 2 - Class II - Single Phase - 1 Pole - 20kA - 48VDC

The T2PDM1/20/48DC and T2PDM1/20/48DCR are single-pole, metal oxide varistor surge arresters, Type 2 according to IEC EN 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2.

Type 2 - Class II - Single Phase - 1 Pole - 40kA - 440VAC

The main use of the T2PDM1/40/440R arrester is in all kinds of industry, residential and administration buildings. They are to be placed into the subsidiary switchboards or control boxes.

Type 2 - Class II - Single Phase - 1 Pole - 20kA L/N - 20kA N/PE - 275VAC

Type 2 Surge Arresters - Pluggable modular SPD Class II (Class C) for TN power supply systems. Non remote and remote versions available

Type 2 - Class II - Single Phase - 1 Pole - 20kA L/N - 40kA N/PE - 275VAC

Type 2 Surge Arresters - Pluggable modular SPD Class II (Class C) for TN and TT power supply systems. Non remote and remote versions available

Type 1 - Class I / Type 2 - Class II - 12.5kA - 1000VDC

The T1PV2/12.5/1000 & T1PV2/12.5/1000R (Remote Version) are lightning arrester type 1+2 according to EN 61643-11. It is designed for protection of positive and negative busbars of photovoltaic systems against the surge effects.

10 Way IEC Unprotected Sockets ABS Plastic & Aluminium Socket Strip with a Hardwired Lead & BS1363 (UK) Moulded Plug - 0 Series

The PD Devices 1002IEC/GB 10 Way IEC Unprotected Socket Strip is an ideal solution for home, office and industrial use.

NOTE: This unit is NOT Surge Protected

10 Way IEC Unprotected Sockets ABS Plastic & Aluminium Socket Strip with a Plug-in IEC Lead and BS1363 (UK) RCD Plug - 0 Series

The PD Devices 1002IEC/GBJL 10 Way IEC Unprotected Socket Strip is an ideal solution for home, office and industrial use.

NOTE: This unit is NOT Surge Protected

10 Way IEC Unprotected Sockets ABS Plastic & Aluminium Socket Strip with a Hardwired IEC Lead and BS1363 (UK) RCD - 0 Series

The PD Devices 1002IEC/GBL 10 Way IEC Unprotected Socket Strip is an ideal solution for home, office and industrial use.

NOTE: This unit is NOT Surge Protected

10 Way IEC, 19 inch Rack Mountable IEC C13 Unprotected Extension Socket Strip - 0 Series

The PD Devices 1008IEC/GB 10 Way IEC Unprotected Socket Strip is an ideal solution for home, office and industrial use.

NOTE: This unit is NOT Surge Protected

Type 3 (Test Class III) - 10 Way IEC Sockets with a Hardwired Lead & BS1363 Plug - Surge Protected ABS Plastic & Aluminium Socket Strip - 2 Series

This PD Devices 10 Way IEC Surge Protected Socket Strip is an ideal solution for home, office and industrial use, fitted with a ON/OFF Power Switch, a 2 Metre Hardwired Lead with a BS1363 (UK) Moulded Plug.

Type 3 (Class III) - 10 Way BS1363 Sockets with a Hardwired Lead & BS1363 Plug - 3 Series - Surge Protected ABS Plastic Socket Strip - 2 Series

This Type 3 PD Devices 1023GBA BS1363 10 Way Surge Protected Socket Strip is an ideal solution for home, office and industrial use.

Type 3 (Test Class III) - 10 Way, 19 inch rack mountable IEC C13 Surge Protected Extension Socket Strip - 2 Series

This Type 3 PD Devices 10 way IEC C13, 19 inch rack mountable surge protected socket strip is an ideal solution for any 19” rack based equipment.

Type 3 (Test Class III) - 10 Way IEC Sockets with a Hardwired Lead & BS1363 Plug - Surge & RFI Protected ABS Plastic & Aluminium Socket Strip - 3 Series

This Type 3 PD Devices 10 Way IEC Surge & RFI Protected Socket Strip is an ideal solution for home, office and industrial use.

Type 3 (Test Class III) - 10 Way IEC Sockets with a IEC Plug-in Lead & BS1363 RCD Plug - Surge & RFI Protected ABS Plastic & Aluminium Socket Strip - 3 Series

This Type 3 PD Devices 10 Way IEC Surge & RFI Protected Socket Strip with BS1363 RCD Plug is an ideal solution for home, office and industrial use.

Type 3 (Test Class III) - 10 Way IEC Sockets with a Hardwired Lead & BS1363 RCD Plug - Surge & RFI Protected ABS Plastic & Aluminium Socket Strip - 3 Series

This Type 3 PD Devices 10 Way IEC Surge & RFI Protected Socket Strip with Hardwired RCD is an ideal solution for home, office and industrial use.

Type 3 (Class III) - 10 Way BS1363 Sockets with a Hardwired Lead & BS1363 Plug - Surge & RFI Protected ABS Plastic Socket Strip - 3 Series

This Type 3 PD Devices 1033GBA BS1363 10 Way Surge & RFI socket strip is an ideal solution for home, office and industrial use.

Type 3 (Class III) - 10 Way, 19 inch rack mountable IEC C13 Surge & RFI Filter Protected Extension Powder Coated Steel Socket Strip - 3 Series

This Type 3 PD Devices 1038IEC/GB 10 Way Surge & Noise 19" Rack Mountable Socket Strip is an ideal solution for home, office and industrial use.

Type 3 (Class III) - 10 Way BS1363 Sockets with a Hardwired Lead & BS1363 Plug - Surge & Noise Protected ABS Plastic Socket Strip - 4 Series

This Type 3 PD Devices 1043GBA BS1363 10 Way Surge & Noise socket strip is an ideal solution for home, office and industrial use.

Type 3 (Class III) - 10 Way, 19 inch rack mountable IEC C13 Surge & Noise Filter Protected Extension Powder Coated Steel Socket Strip - 4 Series

This Type 3 PD Devices 1048IEC/GB 10 Way Surge & Noise 19" Rack Mountable Socket Strip is an ideal solution for home, office and industrial use.

Type 2 - Class II - 40kA - 1050VDC

The T2PV2/40/1000 and the T2PV2/40/1000R (Remote Version) are type 2 lightning & surge arresters according to EN 61643-11 and IEC 61643-11.

Designed for equipotential bonding of positive and negative busbars of photovoltaic systems and the elimination of transient overvoltages that originates during the atmospheric discharges or switching processes.

Type 1 - Class I / Type 2 - Class II - Single Phase - 2 Pole - 12.5kA -12.5kA - 275VAC

Recommended for use in the Lightning protection zones concept at the boundaries of LPZ 0-1. These lightning arresters are for use mainly in the power supply lines, which are operated as TN-S system.

Login - Sitemap - Products - Services

Copyright©2020 PD Devices Ltd - Company Reg: 4253515 VAT Reg: 782 1267 25

Surge Protection Device Manufacturer & Lightning Surge Protection Solutions

Powered by Swanky Pixels