Types of SPD Illustration

Types of SPD Illustration

Types of SPD

Type 1 SPD is characterized by a 10/350 μs current wave.

The Type 1 SPD is recommended in the specific case of service-sector and industrial buildings, protected by a lightning protection system or a meshed cage. It protects electrical installations against direct lightning strokes. It can discharge the back-current from lightning spreading from the earth conductor to the network conductors.

Type 2 SPD is characterized by an 8/20 μs current wave.

The Type 2 SPD is the main protection system for all low voltage electrical installations. Installed in each electrical switchboard,it prevents the spread of overvoltages in the electrical installations and protects the loads.

Type 3 SPD is characterized by a combination of voltage waves(1.2/50 μs) and current waves (8/20 μs).

The Type 3 SPDs have a low discharge capacity. They must therefore mandatorily be installed as a supplement to Type 2 SPD and in the vicinity of sensitive loads.

File Name: Types-SPDs .pdf
Category: Informative Illustrations

Sitemap - Products - Services

Copyright©2019 PD Devices Ltd - Company Reg: 4253515 VAT Reg: 782 1267 25

Surge Protection Device Manufacturer & Lightning Surge Protection Solutions

Powered by Swanky Pixels