Type 1 - Class 1 / Type 2 - Class 2 / Type 3 - Class 3 - Single & Three Phase 40kA Surge Arresters
Ideal for industrial, commercial and domestic applications, the 40kA Distribution Surge Protector 600 Series provides an economic means of preventing damage to electrical distribution systems from mainsborne transient voltages. These transients may occur as the result of nearby lightning strikes or surges derived from the switching of inductive or capacitive loads.
The DSP600 ‘L’ and ‘N’ types should be installed at the point of cable entry to a building and at the distribution point for each floor of a multi-storey building containing sensitive electrical/electronic equipment.
They are normally used as part of a totally integrated surge protection system and as such should be considered as the first line of defence. Local distribution panels and equipment connected ‘downstream’ should also be protected in order to achieve a systematic and co-ordinated approach to surge protection.
The DSP600 ‘N’ type is provided with an on-board system of protection status monitoring Light Emitting Diode’s (LED’s), while the DSP600 ‘L’ type is supplied with a remote monitoring unit, which allows the unit to be installed in areas that are inaccessible for regular inspection.
|DSP L & N Types - 40kA SPDs (Type 1/2/3) - (Class I/II/III)||PD Devices Product Code:|
|Single Phase - ‘N’ type (On-Board LED Monitoring)||DSP1N/600|
|Three Phase - ‘N’ type (On-Board LED Monitoring)||DSP3N/600|
|Three Phase - ‘L’ type (Remote Monitoring Lead Unit)||DSP3L/600|
Also available are our standard DSP600 range, see DSP Series - Single & Three Phase for more information.
|40kA Surge Protection Devices (Type 1/2/3) - (Class I/II/III)||PD Devices Product Code:|
|Single Phase - (without remote signalling)||DSP1/600|
|Single Phase - (with remote signalling)||DSP1A/600|
|Three Phase - (without remote signalling)||DSP3/600|
|Three Phase - (with remote signalling)||DSP3A/600|
|Category:||T1 - Type 1 / Class I|